Ply-Strip radiant ceiling panels

Ply-Strip radiant panels are single-phase, long-wave infrared electric heaters.

They are suitable for heating indoors, either as a primary source of heating or in addition to another heating system. They are suitable for heating both residential and commercial and industrial environments.

Unlike convection heating systems which primarily heat the air, the infrared heating system, which is used by Ply-Strip radiant panels, has numerous advantages:

  • direct heating of specific areas to be heated and maximum energy efficiency;
  • does not dry the air;
  • evenly distributed heat, using long-wave infrared which heats bodies and surfaces, avoiding the creation of temperature stratification in the air;
  • no noise and does not move the air, minimizing the movement of dust and therefore allergens;
  • does not consume oxygen, keeping the air more breathable.
  • quick and easy installation

Way of heating

The advantages of long-wave radiant technology through aluminium elements installed on the ceiling which simultaneously constitute the heat source and the radiating surface in direct contact with the air,
ensures homogeneous heating of the area above which they have been installed, with exceptional thermal comfort, eliminating the disadvantages of alternative heating systems (gas unit heaters, infrared lamps or halogen mushrooms) used up to now in similar applications.

Connection

Ply-Strip panels can be used both with single-phase 230 V and three-phase 400 V power supplies, provided they have a neutral, a choice that can be made directly by the installer in agreement with the end user.
Using a three-phase connection, it will be possible to reduce the power absorbed in less cold periods by using only a part of the heating system created.

(H) Minimum installation height of the appliance = 180 cm from the floor.

1. Minimum distance from the ceiling, 25 cm.
2. Minimum distance from the walls, 25 cm.
3. Minimum distance from other nearby objects, 50 cm.
Stile di riscaldamento

Ply-Strip 500

DIMENSIONS

Size 710x160 mm

Thickness 40 mm

Heated area 5-8 sqm

TECHNICAL FEATURES

Material:
Aluminium

Mains voltage:
Volt 220 – 240

IP degree:
24

Intensity:
2,2 A

Nominal power:
500 W

Ply-Strip 800

DIMENSIONS

Size 960x160 mm

Thickness 40 mm

Heated area 8-12 sqm

TECHNICAL FEATURES

Material:
Aluminium

Mains voltage:
Volt 220 – 240

IP degree:
24

Intensity:
3,5 A

Nominal power:
800 W

Ply-Strip 1000

DIMENSIONS

Size 1310x160 mm

Thickness 40 mm

Heated area 11-16 sqm

TECHNICAL FEATURES

Material:
Aluminium

Mains voltage:
Volt 220 – 240

IP degree:
24

Intensity:
4,35 A

Nominal power:
1000 W

Ply-Strip 1500

DIMENSIONS

Size 1710x160 mm

Thickness 40 mm

Heated area 16-22 sqm

TECHNICAL FEATURES

Material:
Aluminium

Mains voltage:
Volt 220 – 240

IP degree:
24

Intensity:
6,5 A

Nominal power:
1500 W

Create a column of heat


THERMAL RADIATION
FROM ABOVE AND BELOW
For the most difficult situations and the cold never lets up!
Combine the Hot Out Irons with
Ply-Strip aluminium
radiant heat strips.

  • We Check
  • We Analyze
  • We Design
  • We Budget

    To offer you the best solution, with the best result, at the best price.

PLYTERM is an EN-TECH SRL brand,
Via Strada Provinciale 63 R, no. 149 I, 42044 Gualtieri (RE) - Italy
P.I. 02650530351   -   This email address is being protected from spambots. You need JavaScript enabled to view it.